SM10-816G 5V 10mm gear motor 2 phase 4 wires 18° stepper motor
with with metal gear box
The SM10-816G adopts a combination of a 10MM diameter micro stepper
motor and a 10 * 12 precision metal reduction gearbox, with a motor
diameter of 10mm and a reduction gearbox height of 9mm~12mm. The
conventional production lead screw M3P0.5 and D-axis φ 3D2.5mm,
output shaft can be customized according to customer installation.
The basic stepping angle of the motor is 18 degrees, that is, 20
steps per revolution. With the deceleration effect of the gearbox,
the final motor rotation angle resolution can reach 0.05 to 6
degrees, which can be used for various requirements. Precisely
controllable rotational position.
1:5 1:3 1:20 1:10 1:380 1:30 1:50 1:63 1:150 1:298 1:500~1:1000,
etc. Customers can match the speed ratio according to different
torque and rotational speed requirements. The output of the motor
can be bare needle, connecting wire, FPC, etc., which can be
customized according to customer installation requirements
Mechanical Dimension:MM
Technical Features
This product gear box uses the most advanced equipment in the
international processing related parts, so the high precision, high
efficiency, low noise, and the use of reasonable and reliable
process, make the product has better reliability.
The power input part and standard stepper motor can be used as
probe structure, FPC, FFC, PCB cable and other forms.
Part of the output of the motor can be used in a variety of output
structure, such as the circular axis, D axis, and the wire rod!
Typical Applications
- Saliva Analyzer
- Blood Analyzer
- Welding Machine
- Intelligent Security Products
- Fiber Fusion Splicer
- Digital Electronics
Specifications
| PRODUCT NAME | 10mm geared stepper motor |
| MODEL | VSM10-816G |
| RESISTENCE | 39Ω±7% |
| OPERATING TEMPERATURE RANGE | -0~+55 ℃ |
| OEM & ODM SERVICE | AVAILABLE |
Product Detail Presentation
5V Dc 10mm High Precision Geared Stepper Motor For Medical
Equipment, Fiber Fusion Cutting Machine, Etc.
Torque Curve For Reference
Type of Wire Connect
Motor input method with Pin type,FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
Shaft Type
Out shaft standard as follows,also can customerized due to the user
drawings
welcome to contact customer service for more types
Round Type : DIA3mm. 4mm. 5mm
D-cut Type: DIA3-D2.5 DIA4-D3 etc
Screw Type: M3 M4 M5 Serial
Trape Type
I-cut Type: DIA3-I2 DIA4-I3
Other Type: Shaft with a hole etc
Type of Fixture Cover
The regular models are shown in the figure, and the special sizes
can be customized.
Tag:
