10-816G Gearbox Bipolar Stepper Motor With 2:1 to 1000:1 Gear Ratio
Reducer D Output Shaft
This is a 10mm diameter stepper motor attached with a GB12
gearbox(10*12mm).
We have different gear ratio for options, from 2:1 to 1000:1.
With bigger gear ratio, motor’s speed is slower and torque is
bigger.
With smaller gear ratio, motor’s speed is faster and torque is
smaller.
The gear ratio depends on customer’s requirement.
Before you order samples, please confirm gear ratio.
About motor, we have different coil resistance: 20Ω/40Ω
20Ω is motor suitable for 3.3V DC driving, and 40Ω is more suitable
for 5V DC.
The output shaft is 3mm diameter, 2.5mm D-cut shaft.
This is our standard shaft type, we are able to change into lead
screw or other shaft type, if D shaft does not fit your need.
Mechanical Dimension:MM
Typical Applications
- Saliva Analyzer
- Blood Analyzer
- Welding Machine
- Intelligent Security Products
- Fiber Fusion Splicer
- Digital Electronics
Motor parameters
| Motor type | Bipolar stepper motor |
| Rated voltage | 20Ω/40Ω |
| Step angle | 18°/gear ratio |
| Phase No. | 2 phases |
| Gearbox type | 10*12mm GB12 gearbox |
| Output shaft type | 3mm diameter D shaft |
| Shaft length | 10mm |
Gearbox parameters
| Gear ratio | 2:1 | 5:1 | 10:1 | 15:1 | 20:1 | 30:1 | 36:1 | 50:1 | 63:1 | 67:1 | 89:1 | 100:1 |
| Precise ratio | 2.002 | 4.995 | 9.677 | 14.754 | 20.501 | 29.120 | 36.122 | 51.103 | 63.071 | 66.801 | 89.227 | 99.002 |
| Tooth number | 23 | 20 | 13 | 18 | 15 | 12 | 20 | 20 | 14 | 17 | 14 | 13 |
| Gear levels | 2 | 2 | 2 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 4 |
| Efficiency | 80% | 80% | 80% | 72% | 72% | 72% | 65% | 65% | 65% | 65% | 65% | 65% |
|
Gear ratio | 110:1 | 150:1 | 172:1 | 210:1 | 250:1 | 275:1 | 298:1 | 380:1 | 420:1 | 500:1 | 600:1 | 1000:1 |
| Precise ratio | 110.407 | 150.948 | 171.883 | 210.591 | 250.111 | 274.403 | 297.924 | 387.689 | 421.296 | 506.155 | 599.394 | 986.406 |
| Tooth number | 12 | 18 | 13 | 12 | 13 | 12 | 12 | 12 | 12 | 18 | 16 | 12 |
| Gear levels | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 7 | 7 | 7 |
| Efficiency | 59% | 59% | 59% | 59% | 59% | 59% | 59% | 59% | 59% | 47% | 47% | 47% |
Product display
Type of Wire Connect
Motor input method with Pin type,FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
Shaft Type
Out shaft standard as follows,also can customerized due to the user
drawings
welcome to contact customer service for more types
Round Type : DIA3mm. 4mm. 5mm
D-cut Type: DIA3-D2.5 DIA4-D3 etc
Screw Type: M3 M4 M5 Serial
Trape Type
I-cut Type: DIA3-I2 DIA4-I3
Other Type: Shaft with a hole etc
Type of Fixture Cover
The regular models are shown in the figure, and the special sizes
can be customized.
Product Detail Presentation
