VSM10152 10mm diameter M2 lead screw POM slider linear stepper
motor with 4 pins FPC
Description:
This VSM10152 motor is 10mm diameter linear stepper motor with lead
screw + slider.
Step angle is regular 18°/step, lead screw is M2*P0.4, step length
is 0.02mm/step
(Step length means linear distance that slider travels when the
motor takes one step)
Travel distance is 39mm, and it’s determined by lead screw length.
If customers think the lead screw is too long, and we have other
motors with short lead screws for choosing.
About connector type, it is 4 pins FPC.
We can change it into PCB+wires+cable if customers want a connector
(Molex 51021-0400, 1.25mm pitch connector is what we most commonly
use)
Parameters:
| Step angle | 18°/step | Resistance | 10Ω/phase | Voltage | 3.3~5 V DC |
| Travel per step | 0.02mm | Lead screw | M2*P0.4 | Effective stroke | 39 mm |
| Max Starting frequency | 1000Hz(Min) | Max response frequency | 1200Hz(Min) | Pull-out thrust | 120g Min (500 PPS) |
Design drawing:
Product display:
About linear stepper motor with slider:
Our slider motor is a full set of assembly including motor + lead
screw + bracket + slider.
Motor’s step angle is generally 18°/step, which means 20 steps for
each turn.
When motor rotates one turn, slider moves one lead.
For single start lead screws: pitch =lead.
So the step length is (step length means linear movement slider
travels, when the stepper motor take exactly one step):
Lead screw lead/steps of each rotation
For example if lead screw is M2*0.4P (0.4mm pitch regular M2 lead
screw), step angle of the motor is 18°, step length of this motor
is 0.4mm/20=0.02mm/step.
Also, lead screw length is customizable, and we also need to adjust
bracket’s design, if you customize lead screw length.
Application of stepper motors:
Stepper motors are used for precise control, widely used on medical
equipment, 3D printer, industrial precise control, automation
equipment, etc.
Stepper motors can be used in any mechanisms requirement precise
conrtol and rotational/linear movement.
Advantage of stepper motors:
Stepper motor can reach precise control even without close-loop
encoders / without feed back system, also they do not have
electrical brushed. Thus there is no electromagnetic interference
and electrical sparks issues. In some cases, they can replace DC
brushed motors/ brushless motors.
Stepper motors are easy to control with drivers, and this feature
establish its important position in the field of precise control.
1. Precise control achievable, programmable
2. Without electromagnetic interference & electrical sparks
3. Small size
4. Reasonable price
5. Low noise
6. Long service life
Packaging and Shipping information:
Samples are packed with foam sponge inside paper box.
For mass production, products are packed in paper carton.
For sea shipping (Mass production), cartons are packed on pallet.
Shipping time:
By express(DHL/ UPS/ Fedex/ TNT): 5~12 days
By 4PX express: 10~20 days
Sea shipping: 40~60 days (depends on different countries)
